PDA

Επιστροφή στο Forum : [Ε36] εσωτερικός φωτισμός απο E39 σε Ε36 (BMW E39 interior lights to BMW E36)



ataktos m power
25-10-14, 11:41
μπλαφονιερα από e39 σε e36 ταιριάζει;

BILL007
25-10-14, 11:55
Απ'οτι φαίνεται ναι :original: και μάλιστα πρέπει να κάνεις και μια μικροπατέντα

https://forums.bimmerforums.com/forum/showthread.php?1576683-DIY-Central-dome-lighting-with-diodes-from-E39-to-be-installed-in-E36



Hi...
Once IΆve been looking at the web page where MParallel shows his upgraded central dome lighting (E36 conv.) with the diodes from E39....

I decided to do differently.

ThatΆs how IΆve done this.
————————————————————————————————

central lamp from E39
https://www.bmwfans.gr/forum/images/imported/2014/10/b85c92872aa0-1.jpg

take off front cover
https://s51.radikal.ru/i131/1010/72/7dca4ce3beed.jpg

from the back side unclick inside (black) part and push it out
https://s40.radikal.ru/i090/1010/fc/c2a50ad3ccec.jpg

this is that part we gonna work with
https://www.bmwfans.gr/forum/images/imported/2014/10/95d7462b8b6d-1.jpg
https://www.bmwfans.gr/forum/images/imported/2014/10/430c41c5f90c-1.jpg

take off the central switch
https://www.bmwfans.gr/forum/images/imported/2014/10/e44e4ef294f9-1.jpg

now we need to do some cuts and do some soldering.
before and after photos
https://www.bmwfans.gr/forum/images/imported/2014/10/81dbaa1d6ab1-1.jpg
https://s003.radikal.ru/i202/1012/d6/5c627d1670cc.jpg

put the wire for power doides into connector (grey-red wire)
https://www.bmwfans.gr/forum/images/imported/2014/10/c21c5e77527a-1.jpg

solder together connector from E39 lamp and from your E36 lamp
https://i065.radikal.ru/1010/2a/f9b3e9b89dc0.jpg
now more ditailed what to solder:
1 VIO-WHT to RED-YELL (+12V hot in ACC and start)
2 RED-WHT extand and put it to pin 3 in the lamp(+12V hot at all time)
3 BRN-BLK к RED-BLU (open door signal)
4 BRN to BRN (ground)
5 BRN-RED to BRN-YELL (to make the lamp light when push the central button)

then we put the button on itΆs place and assemble everything else
slightly correct the lamp housing with a file or knife
https://www.bmwfans.gr/forum/images/imported/2014/10/5e24ee3a11b6-1.jpg

in the car we need to find only one wire (GRY-RED)
if you have sliding roof, you likely find this wire on the roof switch, you should connect to this wire and put in the central lamp connector in the car

https://www.bmwfans.gr/forum/images/imported/2014/10/87a09f057948-1.jpg

https://www.bmwfans.gr/forum/images/imported/2014/10/2ee1a6d585a7-1.jpg

https://s61.radikal.ru/i172/1010/ed/f5adb4a5080b.jpg


video on youtube (https://www.youtube.com/watch?v=eHXwMfR7huA)

Χρίστος
25-10-14, 16:00
και ολο αυτο για 2 mood lights??
Που τωρα που το ξανασκεφτομαι αμφιβαλλω αν η γωνια τους ειναι και σωστη....